Mobil Delvac 1 5W-40
Supreme Performance Heavy Duty Diesel Engine Oil
Mobil Delvac 1 5W-40 is a fully synthetic supreme performance heavy duty diesel engine oil that helps extend engine life while providing long drain capability and fuel economy for modern diesel engines operating in severe applications. Mobil Delvac 1 utilizes state-of-the-art technology to deliver exceptional performance in modern low emission engines, including refrigerated units, as well as older, well-maintained engines. Mobil Delvac 1 5W-40 is recommended for use in a wide range of heavy-duty applications and operating environments found in the on-road transport and off-road mining, construction, and agricultural industries. Mobil Delvac 1 also meets the requirements of the API SL specification for gasoline engines used in mixed fleets.
The unequalled performance of Mobil Delvac 1 5W-40 is the result of extensive cooperative development work with major equipment builders and application of the latest lubrication technology. As a result, this product meets or exceeds the requirements of the latest API, ACEA, JASO, and Global industry specifications for diesel engine oils, as well as the requirements of virtually all major American, European, and Japanese engine manufacturers.
Many modern, low emission diesel engines generate more soot and operate at higher temperatures than older engines. This significantly increases the need for supreme performance lubricants. Current tighter engine designs reduce oil consumption, resulting in less fresh oil makeup to replenish depleted additives. Top piston rings are located higher, bringing the oil film closer to the combustion chamber and exposing the lubricant to severe thermal stresses. Mobil Delvac 1 5W-40 maintains outstanding performance at significantly higher temperatures than other high performance diesel engine oils. It is also fully compatible with conventional oils. The key benefits include:
Features | Advantages and Potential Benefits |
---|---|
Meets or exceeds demanding specifications of major OEMs | One engine oil for mixed fleet operations |
Outstanding thermal and oxidation stability | Reduced low temperature sludge build-up and high temperature deposits |
Enhanced film strength at high temperatures | Reduced engine scuffing and bore polishing |
Inherent stay-in-grade shear stability | Wear protection and reduced oil consumption; maintains viscosity in severe, high temperature service |
Advanced formulation and viscometrics | Improved fuel economy |
Low volatility | Reduced oil consumption |
Exceptional low temperature pumpability | Easier engine start-up and reduced wear |
Enhanced TBN quality reserve | Deposit control and extended drain capability |
Outstanding resistance to corrosion | Extended life of critical wear surfaces |
Long drain capability | Increased operating efficiency and lower overall cost |
Component compatibility | Longer gasket and seal life, extended service intervals |
Mobil Delvac 1 5W-40 is recommended for use in all super high performance diesel applications, including modern low emission engine designs with Exhaust Gas Recirculation (EGR). These applications include the following:
Mobil Delvac 1 Meets or Exceeds the requirements of: | 5W-40 |
---|---|
API CI-4 PLUS/CI-4/CH-4/SL/SJ | X |
ACEA E7/E4 | X |
Cummins CES 20078/20077/20076/20075 | X |
Ford WSS-M2C171-D | X |
Renault Trucks RXD | X |
Global DHD-1 | X |
JASO DH-1 | X |
Mobil Delvac 1 5W-40 has the following builder approvals: | 5W-40 |
---|---|
Detroit Diesel Power Guard Oil Specification 93K214 | X |
Mack EO-N Premium Plus 03, EO-M Plus | X |
MB-Approval 228.5 | X |
Scania LDF | X |
Volvo VDS-3, VDS-2 | X |
Mobil Delvac 1 5W-40 is recommended by ExxonMobil for use in applications requiring: | 5W-40 |
---|---|
ACEA E5/E3 | X |
API CG-4/CF-4/CF | X |
Caterpillar ECF-1 | X |
Cummins CES 20072/20071 | X |
Mobil Delvac 1 5W-40 | |
---|---|
SAE Grade | 5W-40 |
Viscosity, ASTM D 445 | |
cSt @ 40ºC | 102 |
cSt @ 100ºC | 14.8 |
Viscosity Index, ASTM D 2270 | 151 |
Sulfated Ash, wt%, ASTM D 874 | 1.35 |
Total Base #, mg KOH/g, ASTM D 2896 | 12 |
Pour Point, ºC, ASTM D 97 | -45 |
Flash Point, ºC, ASTM D 92 | 226 |
Density @ 15ºC kg/l, ASTM D 4052 | 0.854 |
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
For Switzerland Use: Toxicity class: free BAG T No.: 102759
The Mobil logotype, the Pegasus design, and Delvac 1 are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
COD | Yes |
---|