Reversing Rear View Camera With Night Vision for For Toyota Fortuner, Innova

This is a high quality waterproof rear view camera with CCD sensor, specifically designed to fit the standard license plate light on an Toyota Fortuner, Innova Vehicle.

• Take out your stock license plate light at the back of your car.
• Fix the camera to where the stock license plate light was.
• Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power.
• Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative
• Connect the video cable to the monitor/rear camera input on the Multimedia interface or the optional Wi-Fi module.

• 1 x Toyota Fortuner, Innova. (night vision) rear view camera
• 1 x 6m video cable extension cord
• 1 x 1.2m power cable

• Certification: CE
• Image device: MT9V136 CCD Sensor
• TV system：PAL/NTSC
• Resolution: 480 TV lines
• Effective pixels: 720*576/480 pixels
• Sensing area: 3.584 mm *2.688 mm
• Shutter speed: 1-1/10000
• Video output: 1.0 VP-P,75 OHM
• Gamma consumption: 0.45
• White balance：auto
• Scanning system: 2：1 interlace
• Lens angle: 135°/170°
• Waterproof: IP67/68
• Minimum illumination: 0.01 Lux/F=1.2(0 Lux with IR on)
• Power supply: DC 12V
• Operation temperature：-20℃ - 75℃，RH 95% MAX
• Storage temperature：-40℃ - 85℃，RH 95% MAX

PLEASE NOTE: 

Because some car have different model, so just in case, before you place the order, take a look of your number plate light cover, check if is same SHAPE and SIZE as our camera. 

Installation position :

Instruction : 

* No-DVD-Player or DVD-off Condition: when reversing, the monitor is automatically switched on to display real-time backup images. After reversing, it is automatically switched off.
* DVD-On Condition: When reversing, the monitor is automatically switched to display real-time backup images. After reversing, it is automatically switched back to display DVD video.